Eurovac Products

Detail Drops

Eurovac systems are designed for convenient use. Wherever possible we position hanging drops on each side of a vehicle location. For continuous run systems, we provide tool hangers for “duck foot” tools that shut off air flow when the tool is placed in the tool holder. Air hangers are available on drops for holding air guns used to remove dust from cracks and crannies in dashboards.

Chemical Dispensing Detail Drops

The Central Chemical Dispensing System automatically mixes cleaning chemicals (including a rug shampoo, which is heated up to 130 degrees F.), and pumps them to the detail workstations. The chemical dispensing system is installed in conjunction with a Eurovac I, Eurovac II or Eurovac III industrial-grade turbine pump and induction motor.

The hanging or wall mount chemical dispensing workstations are strategically located between each detail bay. Chemicals are applied with dispensing guns attached to 25-40 ft. color coded coiled hoses. The system also features an air gun and compressed air line for blowing out debris from cracks and crevices.

Eurovac systems are engineered to provide a constant air speed of 4,500 feet per minute. This is accomplished by using 2″ drops and 2-1/2″ pipe at the end of the pipe run, with 3″ to 6″ pipe at the pump (depending on the size of the system and the number of drops on the pipe run). Both PVC and metal pipe is available. When water is not a factor, we recommend metal pipe because of the longer radius bends, which maximize performance and minimize clogging.