Eurovac Products

Your shop will experience increased productivity and reduced technician error with properly mixed and identified cleaning chemicals, ready for use at each Detail Pendant Drop.  Drops are strategically located between each detail bay, positioned conveniently close to the car door.  Detail Pendant Drops can be designed for up to 8 chemicals as well as including options such as compressed air and vacuum.

Part Numbers:

• PEN-S3C-1V000000 (Powder Coat Finish):  3 Chemicals & 1 Vacuum Hose/Tool
• PEN-S4C-1V000000 (Powder Coat Finish):  4 Chemicals & 1 Vacuum Hose/Tool
• PEN-S5C-1V000000 (Powder Coat Finish):  5 Chemicals & 1 Vacuum Hose/Tool
• PEN-S6C-1V000000 (Powder Coat Finish):  6 Chemicals & 1 Vacuum Hose/Tool
• PEN-S7C-1V000000 (Powder Coat Finish):  7 Chemicals & 1 Vacuum Hose/Tool
• PEN-S8C-1V000000 (Powder Coat Finish):  8 Chemicals & 1 Vacuum Hose/Tool

• PEN-D3C-1V000000 (Powder Coat Finish):  3 Chemicals (each side) & 1 Vacuum Hose/Tool
• PEN-D4C-1V000000 (Powder Coat Finish):  4 Chemicals (each side) & 1 Vacuum Hose/Tool
• PEN-D5C-1V000000 (Powder Coat Finish):  5 Chemicals (each side) & 1 Vacuum Hose/Tool
• PEN-D6C-1V000000 (Powder Coat Finish):  6 Chemicals (each side) & 1 Vacuum Hose/Tool
• PEN-D7C-1V000000 (Powder Coat Finish):  7 Chemicals (each side) & 1 Vacuum Hose/Tool
• PEN-D8C-1V000000 (Powder Coat Finish):  8 Chemicals (each side) & 1 Vacuum Hose/Tool

Includes:

• 25’ Coiled Lines & Chemical Dispensing Guns
• 1-1/2” x 17’ Vacuum Hose, Cleaning Claw & Shut Off Holster
• PVC Pipe, Bends & Fittings for interconnection from Central Vacuum System and Detail Pendant Drop
• Flexible Tubing & Fittings for interconnection from Central Chemical Dispensing System and Detail Pendant Drop.  Tubing is run through a PVC Chaser up at beam level.
• Unistrut for spanning from beam to beam to ensure the drop is rigidly mounted from above

Optional Additions:

• Stainless Steel Construction
• Interceptor or Mobile Wet Pick Up for separating the majority of vacuumed particulate prior to entering the piping system up above which helps reduce the risk of clogs
• Additional Hose, Holster & Cleaning Claw
• Heated Extractor Hose, Holster & Cleaning Claw
• 25’ Coiled Line & Air Blow Gun for blowing out particulate from hard to reach areas inside a car.  Eurovac supplies a 15’ airline for running from the pendant drop up to the beams.  Typically customer connects from this 15’ airline to the central air hard piping which is connected to a centrally located compressor system.
• Start Station which turns the central vacuum system on for a period of time.  Includes low voltage wire for connection back to the central vacuum system control panel
• 110 Volt Electrical Outlet
• 40’ Coiled Chemical Lines & 25’ Vacuum Hoses
• Cross Support Brackets for additional support for pendant drops that are situated in facilities with 20’+ beam heights