Eurovac Products

Application: 

• 1 to 2 Tech Housekeeping Wet Mix Vacuum System
• 1 to 2 Tech Grinder Wet Mix Vacuum System
• 3 to 4 Tech Orbital Sander Wet Mix Vacuum System

Part Numbers: 

• EIC-M05-1800400B:  5HP System
• EIC-M10-1800400B:  10HP System
• EIC-M15-2400400B:  15HP System

Equipment Specs:   

• Construction/Finish:  Carbon steel which is epoxy powder coat painted and treated with zinc oxide and rust inhibitor zinc primed and final powder coat finish
• Blower:  Regenerative Blower set to run for 20,000+ hours of continuous use
• Filtration:  Initial venturi entry for deep penetration into the water, secondary baffles to completely mix the dust particulate with the water and final stainless steel mesh descicant mist eliminator(s) (99% efficient at 5 micron)
• Water Level Indicator: Automatic level control via an ultra sonic probe situated in a reservoir of “quiet” water
• Relief Valve: Valve automatically opens when system is shut off to exhaust hydrogen gas build-up in an aluminum application
• Particulate Removal: Ball valve for removing the sludge
• Electrical: 208-240, 460 and 575 volts. 3 phase, 60 hertz Premium Efficiency TEFC Motor
• Inlet:  3”OD to 4”OD

PLC Control Panel Specs:   

• NEMA 4 Enclosure (Indoor/Outdoor)
• Start/Stop
• Overload Protection
• Run Light
• Hour Meter
• 120v Step Down Transformer (ie: Control remote on/off switches)
• Automatic Water Fill
• Low or High Water Automatic Shut Off
• Provisions for venting gasses
• Fault Log
• Manual Control for diagnostic purposes
• Input and Output Status screens
• System Parameter Adjustments
• Fan Pressure and Amperage Monitor
• Differential Pressure Monitor
• User programmable run timer

System Performance:

• 5HP System
• Vacuum – 100″WC
• Flow – 160 CFM

• 10HP System
• Vacuum – 100″WC
• Flow – 310 CFM

• 15HP System
• Vacuum – 95″WC
• Flow – 510 CFM

Optional Additions:

• Stainless Steel Construction
• Hydrogen Relief Vent (For aluminum applications)
• 2 Micron Mist Eliminator