<!-- wp:paragraph --> <p> We offer a complete range of both high volume and high vacuum dust collection solutions to capture particulate right at the source of any stationary equipment or hand held tool within a woodworking facility.  A dust collector with a high volume of air will be needed to capture the particulate from the source of machines such as C&C Routers, Table Saws and Planers which have vacuum take-off sizes ranging from 3” to 6”.  Where as; a high vacuum system will be needed to capture dust at the source of hand held tools such as Orbital Sanders or Routers which have smaller vacuum take-off sizes ranging from ¾” to 1-1/2”.</p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>Eurovac can provide the equipment you need to build a successful detailing operation.  We have industrial vacuum systems and chemical dispensing equipment for cleaning the interior of vehicles as well as pressure wash systems for cleaning the exterior of vehicles.  The addition of Eurovac equipment into a detail facility will ensure the bays are organized and efficient with reliable detailing equipment ready for use at each car door.   </p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p><strong>Industrial Vacuum Systems</strong></p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>Eurovac offers industrial vacuum systems that are suited for 1 bay detail operations up to 15+ bay detail facilities.  All systems are produced with heavy duty welded construction, state of the art filtration and high efficiency industrial grade motors. </p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>We offer a complete vacuum system solution with all necessary tube, bends, fittings, hoses and cleaning tools.</p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p><strong>Chemical Dispensing Systems </strong></p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>A Eurovac Chemical Dispensing System automatically mixes the primary detailing chemicals (ie: tire cleaner, glass cleaner) with water to their proper ratio and pumps them out to coiled lines and spray guns, which are mounted on Eurovac Pendant Drops located in the detailing bays. </p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>Eurovac Chemical Dispensing Systems are best used in conjunction with a Eurovac Industrial Vacuum System.  The floors and seats of a vehicle are most effectively cleaned with a heated shampoo that helps to lift the dirt and is pulled away by high vacuum performance. </p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p><strong>Pressure Wash Systems</strong></p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>Eurovac Pressure Wash Systems are designed to withstand the most rigorous detail wash operations.  All systems are produced with heavy duty welded construction, necessary pressure relief features and high efficiency industrial grade motors. </p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>We offer a complete pressure wash system solution with all necessary tube, bends, fittings, overhead booms and pressure wash guns.</p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p></p> <!-- /wp:paragraph -->