<!-- wp:paragraph --> <p> We offer a complete range of both high volume and high vacuum dust collection solutions to capture particulate right at the source of any stationary equipment or hand held tool within a woodworking facility.  A dust collector with a high volume of air will be needed to capture the particulate from the source of machines such as C&C Routers, Table Saws and Planers which have vacuum take-off sizes ranging from 3” to 6”.  Where as; a high vacuum system will be needed to capture dust at the source of hand held tools such as Orbital Sanders or Routers which have smaller vacuum take-off sizes ranging from ¾” to 1-1/2”.</p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>Our vacuum arches, canopies and stanchions can be painted to your specific site colors, which will be sure to draw attention to your carwash and increase customer traffic.  Your customers will enjoy the vacuum experience with hose drops right at each car door and a high performing Eurovac industrial vacuum system that picks up particulate immediately on the first cleaning tool pass.  To further enhance customer experience, you can also include options such as mat racks, garbage cans, towel storage shelves, compressed air and chemical dispensing.</p> <!-- /wp:paragraph --> <!-- wp:paragraph --> <p>Eurovac will help you choose the right vacuum system for your site and ensure the process runs smoothly.  Our experienced staff will assist with layout design, material take-off (right down to the required nut/bolt) and installation/commissioning.</p> <!-- /wp:paragraph -->