Eurovac Products
EI – Wet Mix Dust Collector
Application:
- 1 to 2 Tech Housekeeping Vacuum System
- 1 to 2 Tech Grinder Vacuum System
- 3 to 4 Tech Orbital Sander Vacuum System
Part Number:
- EIP-M05-1800410B: 5HP System
- EIP-M10-1800410B: 10HP System
- EIP-M15-2400410B: 15HP System
Equipment Specs:
- Blower: Regenerative Blower set to run for 20,000+ hours of continuous use
- Filtration: Initial venturi entry (for deep penetration of dust into the water), secondary baffles (to help knock water/dust back down) and final mesh mist eliminator (99% efficient to 5 microns)
- Manual Water Intake Port
- Relief Valve: Exhausts hydrogen gas build-up in an aluminum application, when system is shut down
- Automatic Low Water Shut Down: Unit will not operate if water is not set to proper levels
- Time Delay: A time delay switch prevents the start of the dust-producing process until the collector is in complete operation
- Off Delay: An off delay timer switch allows the system to run for a set amount of time once the dust-producing process has stopped, ensuring all dust in the hose reaches the collector.
- Inlets: 3HP to 10HP: Qty 3: 1-1/2″ Inlets
- 15HP: Qty 4: 1-1/2″ Inlets
System Performance:
- 5HP System
- Vacuum – 100″WC
- Flow – 160 CFM
- 10HP System
- Vacuum – 100″WC
- Flow – 310 CFM
- 15HP System
- Vacuum – 95″WC
- Flow – 510 CFM
Includes:
- Silencer, Exhaust Cap, 4 Anti Vibration Pads & Wedge Anchors
- Pre-wiring from panel to pump
Not Included:
- Three phase cord and plug
Additional Resources
-
EI - Wet Mix Portable Schematic
Download