Heated Extractor Pendant Drops

Product Overview

Heated Extractor Pendant Drops bring the two most highly used detailing products in heated extraction and vacuum to strategic locations between each detail bay, positioned conveniently close to the car door. Drops are tied to a Central Heated Extractor System and a Central Detail Vacuum System which ensures consistently hot properly mixed chemical dispensing and vacuum performance.

Product Details

Comprehensive information about this product

Part Numbers

SYS-030-6101V1E2 (Powder Coat Finish): 1 Extractor Hose/Tool & 1 Vacuum Hose/Tool

Includes

1-1/2” x 17’ Extractor Vacuum Hose, S.S. Extractor Cleaning Claw & Shut Off Holster
1-1/2” x 17’ Vacuum Hose, Cleaning Claw & Shut Off Holster
PVC Pipe, Bends & Fittings for interconnection from Central Vacuum System and Heated Extractor Pendant Drop
Flexible Tubing & Fittings for interconnection from Central Chemical Dispensing System and Heated Extractor Pendant Drop. Tubing is run through a PVC Chaser up at beam level.
Unistrut for spanning from beam to beam to ensure the drop is rigidly mounted from above

Optional Additions

Stainless Steel Construction
Interceptor or Mobile Wet Pick Up for separating the majority of vacuumed particulate prior to entering the piping system up above which helps reduce the risk of clogs
25’ Coiled Line & Air Blow Gun for blowing out particulate from hard to reach areas inside a car. Eurovac supplies a 15’ airline for running from the pendant drop up to the beams. Typically customer connects from this 15’ airline to the central air hard piping which is connected to a centrally located compressor system.
Start Station which turns the central vacuum system on for a period of time. Includes low voltage wire for connection back to the central vacuum system control panel
110 Volt Electrical Outlet
Cross Support Brackets for additional support for pendant drops that are situated in facilities with 20’+ beam heights