Spark Detection & Extinguishing Systems

• CPA-EXP-SDS01000:  Spark Detection System - 1 Zone     
• CPA-EXP-SDS02000:  Spark Detection System - 2 Zone      
• CPA-EXP-SDS04000:  Spark Detection System - 3 to 4 Zone  

Zone Selection Notes:  If branch off occurs before 30' of ducting, an additional zone is required. As well, a multi zone spark detection system can be used for multiple collectors if they are located close to each other.                                                                                                                                                                             

 Abort Damper Part Numbers: 

• SYS-AD0-08000000:  8" Abort Damper     
• SYS-AD0-10000000:  10" Abort Damper      
• SYS-AD0-12000000:  12" Abort Damper
• SYS-AD0-14000000:  14" Abort Damper     
• SYS-AD0-16000000:  16" Abort Damper      
• SYS-AD0-18000000:  18" Abort Damper
• SYS-AD0-20000000:  20" Abort Damper     
• SYS-AD0-22000000:  22" Abort Damper      
• SYS-AD0-24000000:  24" Abort Damper
• SYS-AD0-26000000:  26" Abort Damper     
• SYS-AD0-28000000:  28" Abort Damper      
• SYS-AD0-30000000:  30" Abort Damper
• SYS-AD0-32000000:  32" Abort Damper   

• An airspeed of 4000 ft/min requires a minimum of 20’ between the detectors and the spray assemblies 
• Minimum required water pressure is 50 PSI at 19 USGPM flowing at valve location. Booster pump may be required  

• Two ultra sensitive, ultra high speed spark detectors which look for visible and near infrared radiation moving through the duct 
• Two quick release clips allowing for easy removal to clean the lenses
• Extinguisher spray assembly w/ strainer and water cut off valve 
• 24 Volt DC alarm horn - indicates activation
• 4.5 Amp hour back up batteries 

• CPA-EXP-SDS01000:  Atmospheric Booster Pump (30GPM @ 60 PSI)